Specifications
52
Phone
800-236-0112
FAX
800-444-0331
www.tapconet.com
Hydraulic Slide Gate Operators, Cable Reinforced Crash Beams
LXL Hydraulic Slide Gate Operators
More secure than chain-drive units
Low maintenance, self contained hydraulic
system with minimal wear items
UL 325 Compliant, ETL Listed
Safe 24VAC/24VDC controls standard
Drive rail increases rigidity of gate panel
Continuous duty operation
Hand release for
manual operation
Built-in maximum run timer
and timer to close
On board 3 button control station
On board LCD display for
programming, setting of
parameters and diagnostics
LXL Series Hydraulic Slide Gate
Operators are designed for
consistent and dependable
operation of all styles of sliding
gates in a variety of high cycle
applications. The LXL Gate
Operators are ideal for highly
sensitive commercial and industrial facilities such as airports, oil
refineries and power plants. They are easily adaptable to lower risk
applications including gated communities, small businesses and
private residence facilities. LXL Series hydraulic operators do not
require constant maintenance typical of units with chains, sprockets,
belts and pulleys.
LXL-1521-HS Gate Operator, 300# pull rating, High Speed, 220V 1PH
114924
$8,195
LXL-1321-SS Gate Operator, 350# pull rating, Standard Speed, 220V 1PH
114926
$12,295
LXL-1521-SS Gate Operator, 400# pull rating, Standard Speed, 220V 1PH
114923
$6,750
LXL-1521-HD, Gate Operator, 600# pull rating, Heavy Duty Unit, 220V1PH
114925
$7,795
LXLD-1521-SS Gate Operator, 1700# pull rating, Extra Duty, 220V1PH
114927
$17,750
LXLT-1521-SS Gate Operator, 1700# pull rating, Super Duty, 220V1PH
114928
$21,495
CR-25 Cable Reinforced Crash Beams
Crash tested per U.S. Navy and Department
of the Army Specifications
Stopping Power 10,000 lbs. @ 18 mph
( 4,535.9 kg @ 29 km/hr )
Electromechanical and manual operation
Custom gate sizes available
Long-term durability
Cost effective solution
Ease of installation and
integration
Continuous duty operation
CR25 Crash Beam Barriers Gates
are engineered and designed to
protect at-risk access points and
prevent forced vehicle entry or
exit for industrial, commercial
and institutional facilities requiring medium to high security. Available
in manual, hydraulic or electromechanical operating modes, the crash
beam barrier gates are ideally suited and for oil refineries, chemical
plants, train yards, storage facilities, technical centers, nuclear facilities,
embassies, military installations and government agencies.
Basic components of the crash beam barriers include the standard
vertical to horizontal arm with an energy absorption cable assembly,
hinge post, receiver/latch post, cable-reinforced crash beam and
automatic controls. When the crash beam is hit by a vehicle, the
aluminum beam gives way to the cable inside, and the impact energy
is absorbed as the cable stretches. When the cable is at full tension, the
impact energy is then transferred to the foundation through the hinge
post and the receiver/latch post of the crash beam.
With a gate arm made of 4" aluminum pipe lined with a 7/8" stainless
steel wire rope, these crash barriers have been successfully crash
tested for energy absorption capacity per U.S. Navy Specifications and
Department of the Army rating level of KN1-LN2. These models are
listed by the U.S. Army Corps of Engineers in the document, Protection
Against Malevolent Use of Vehicles at Nuclear Power Plants (NUREG/
CR-6190 Vol. 2, Rev. 1).
CR25-144W Crash Beam Barrier, 12' Opening, with warning lights 114918
$32,850
CR25-240W Crash Beam Barrier, 20' Opening, with warning lights 114919
$32,850
CR25-300W Crash Beam Barrier, 25' Opening, with warning lights 114920
$32,850
CR25-144M Crash Beam Barrier, 12' Opening, Manual 114921
$22,995
CR25-300M, Crash Beam Barrier, 25' Opening, Manual 114922
$22,995