Owner`s manual

5
3. Assemble the following parts using 6 #10 sheet metal screws. Both “B” and “C” panels should t inside of “D” and “A” panel
anges. Attach “D” (bottom panel) to “B” (side panel with electric) and “C” (side panel). After the top and sides are assembled,
attach ”A” (top panel) using 6 #10 sheet metal screws provided.
4. Position the assembled lter box on rear of furnace, supporting it approximately 4 inches from the oor, covering the rear
distribution blower. Make sure the lter box is tightly pressed to the back of the furnace. Use 8 #10 self-tapping
screws (included) to rmly attach the lter box to the sides of the furnace.
Top Panel (A)
Side Panel With Electric (B)
Side Panel (C)
Bottom Panel (D)
#10 Sheet Metal Screw
Twelve Places
Side Panel (C)
Bottom Panel (D)
Side Panel with Electric (B)
#10 Sheet Metal Screw
Top Panel (A)
Side Panel (C)
Bottom Panel (D)
#10 Sheet Metal Screw
Top Panel (A)
Side Panel with Electric (B)
Filter Box
#10 Screw
Filter Box
#10 Screw
Filter Box
#10 Screw