User Guide
L
L O1
N
L
L O2 O1
N
L
L O1
N
L
L O2 O1
N
LEGEND:
Specication
Maximum switching potential: 12V DC / 18V AC
Maximum switching current: 50mA
Maximum power supply: 230V
Operating temperature: -20°C to 70°C
Operating humidity: up to 85%
Wiring:
Еach cable has a color code:
Red - Power supply; Black - Switch 1; Blue - Switch 2; Green - Switch 3; White - Switch 4
Assembling:
1. Connect the Red cable with the L of the switch to the same supply voltage/phase as for the
Shelly device or Sx output.
2. Connect outputs O1 to OX to the inputs of the Shelley device follow color scheme.
3. Insert the key into the wall and tighten it with the screws to the bracket.
Do not tighten too much, this may distort the frame and block the position of the key.
4. Place the decorative frame on the already installed key and press until the two parts are
rmly fastened.
L
N
• N - Neutral input;
• L - Line input;
• O1 - Switch 1;
• O2 - Switch 2;
• O3 - Switch 3;
• O4 - Switch 4
L
L O1
N
L
L O4O3O2O1
N
LLI1I2I3I4 N
Sizes of holders
for Shelly devices