Instructions

ManualsBrandsShelly ManualsAll Products & Manufacturers4Pro PM Shelly DIN rail mount relay Bluetooth, Wi-Fi

SHELLY MOBILE APPLICATION

FOR

INTRODUCTION

Shelly devices can be controlled and managed directly in

the local network or by using the Shelly cloud service ac-

cessible via the Internet.

Download the Shelly Cloud Application by scanning the QR

code above, or access the devices through the Embedded

web interface, explained further down in the user guide.

Shelly devices are compatible with Amazon Echo and Goo-

gle Home supported functionalities. See details at

https://shelly.cloud/compatibility/ .

REGISTRATION

The rst time you load the Shelly Cloud mobile app, you

have to create an account which can manage all your

Shelly devices. You need to use an actual e-mail because

that e-mail will be used in case of а forgotten password!

FORGOTTEN PASSWORD

In case you forget or lose your password, click the “Forgot

Password?” link on the login screen and type the e-mail you

used in your registration. You will receive an e-mail with а

link to а page where you can reset your password. The link

is unique and can be used only once.

⚠ATTENTION! If you are unable to reset your password,

you have to reset your device (as explained in “Device Inclu-

sion” section, Step 1).

FIRST STEPS

After registering, create your rst room (or rooms), where

you are going to add and use your Shelly devices. Shelly

Cloud allows you to create scenes for automatic control

of devices at predened hours or based on other param-

eters like temperature, humidity, light, etc. (with available

sensors in Shelly Cloud). Shelly Cloud allows easy control

and monitoring using a mobile phone, а tablet, or a PC.

Shelly Pro 4PM can be grouped with other devices in the

application, as well as be set to trigger actions on other

Shelly devices.

DEVICE INCLUSION

Step 1

When the installation of Shelly is done and the power is

turned on, Shelly will create its own Wi-Fi Access Point

(AP).

⚠WARNING! In case the device has not created its own AP

Wi-Fi network with SSID like ShellyPro4PM-84CCA87E3EFC,

please check if the device is connected according to the

User and Safety Guide, Installation Instructions. If you still

do not see an active Wi-Fi network with SSID like Shelly-

Pro4PM-84CCA87E3EFC, or you want to add the device to

another Wi-Fi network, reset the device. If the device has

been powered on, you have to restart it by powering it off

and then again on. After that you have one minute to press

5 consecutive times the button/switch connected to the SW

terminal. You should hear the relay trigger itself. After the

trigger sound, Shelly Pro 4PM will return to AP mode. If not,

please repeat or contact our customer support at:

support@shelly.cloud .

Step 2

Please keep in mind that Shelly devices’ inclusion is differ-

ent on iOS and Android devices.

1. iOS inclusion - On your iOS device, open the Settings

menu > WLAN and connect to the Wi-Fi network created by

your Shelly device, i.e. ShellyPro4PM-84CCA87E3EFC (g.

1). Open your Shelly app again and type in your home Wi-Fi

credentials (g. 2).

g. 1

g. 2

2. Android inclusion - From the hamburger menu on the

main screen of your Shelly App choose “Add device“. Then

choose your home network and type in your password

(g. 3). After that, pick the Shelly device you want to in-

clude. The name of the device will be similar to: Shelly-

Pro4PM-84CCA87E3EFC (g. 4)

g. 3

g. 4

Step 3

Approximately 30 sec. after discovering any new devices

оn the local Wi-Fi network, а list will be displayed in the

“Discovered Devices” room by default.

Step 4

Select “Discovered devices” and choose the device you

want to include in your account.

Step 5

Enter a name for the device (in the “Device Name” eld).

Choose a “Room” where the device will be positioned and

controlled from. You can choose an icon or add a picture to

make it easier to recognize.Press “Save device”.

Step 6

To control Shelly devices only through the local network,

press “No”

DEVICE SETTINGS

After your Shelly device is added in the application, you

can control it, change its settings, and automate the way

it works. To switch the device on and off, use the ON/OFF

button. For device management, simply click on the de-

vice’s name. From there you may control the device, as well

as edit its appearance and settings.

STATUS AND CONTROL

Upon clicking on the device’s name, you will be able to view

real-time power consumption data under “Status and Con-

trol”. By using the calendar on top, you can go back and

view your consumption history for any given period.

Summary of content (2 pages)

PAGE 1
SHELLY MOBILE APPLICATION FOR another Wi-Fi network, reset the device. If the device has been powered on, you have to restart it by powering it off and then again on. After that you have one minute to press 5 consecutive times the button/switch connected to the SW terminal. You should hear the relay trigger itself. After the trigger sound, Shelly Pro 4PM will return to AP mode. If not, please repeat or contact our customer support at: support@shelly.cloud .
PAGE 2
SETTINGS MENU Here, you can change the settings of your device. Timer: Аllows you to manage the power supply automatically. You may use: • Auto ON: After turning off, the relay output will be automatically turned on after a predefined time (in seconds). • Auto OFF: After turning on, the relay output will be automatically turned off after a predefined time (in seconds). Schedule: This function requires a working connection to the Internet.