User Guide
Step 4:
Approximately 30 seconds after discovery of any
new Devices оn the local WiFi network, а list will
be displayed by default in the “Discovered Devices”
room.
Step 5:
Enter Discovered Devices and choose the Device
you want to include in your account.
Step 6:
Enter a name for the Device (in the Device Name
eld). Choose a Room, in which the Device has to be
positioned. You can choose an icon or add a picture
to make it easier to recognize. Press “Save Device”.
Step 7:
To enable connection to the Shelly Cloud service for
remote control and monitoring of the Device, press
“YES” on the following pop-up.
Shelly Device Settings
After your Shelly device is included in the app, you
can control it, change its settings and automate the
way it works. To enter at the details menu of the re-
spective Device, simply click on it’s name. From the
details menu you may control the Device, as well as
edit its appearance and settings.
Internet/Security
WiFi Mode - Client: Allows the device to connect to
an available WiFi network. After typing the details in
the respective elds, press Connect.
WiFi Client Backup: Allows the device to connect to
an available WiFi network, as a secondary (backup),
if your primary WiFi network becomes unavailable.
After typing the details in the respective elds, press
Set.
WiFi Mode - Acess Point: Congure Shelly to create
a Wi-Fi Access point. After typing the details in the
respective elds, press Create Access Point.
Cloud: Enable or Disable connection to the Cloud
service.
Restrict Login: Restrict the web interface of Shely
with a Username and Password. After typing the
details in the respective elds, press Restrict Shelly.
Actions
Shelly i3 may send commands for control of other
Shelly devices, by using a set of URL endpoints. All
URL actions can be found at: https://shelly-api-docs.
shelly.cloud/
• Button Switched ON: To send a command to an
URL, when the button is switched ON. Works only
when button is congured as Toggle.
• Button Switched OFF: To send a command to an
URL, when the button is switched OFF. Works only
when button is congured as Toggle.
• Button Short Press: To send a command to an
URL, when the button is pressed once. Works only
when button is congured as Momentary.
• Button Long Press: To send a command to an
URL, when the button is pressed and hold. Works
only when button is congured as Momentary.
• Button 2x Short Press: To send a command to an
URL, when the button is pressed two time. Works
only when button is congured as Momentary.
• Button 3x Short Press: To send a command to an
URL, when the button is pressed three times. Works
only when button is congured as Momentary.
• Button Short + Long Press: To send a command
to an URL, when the button is pressed once and then
pressed and hold. Works only when button is cong-
ured as Momentary.
• Button Long + Short Press: To send a command
to an URL, when the button is pressed and hold, and
then pressed again. Works only when button is con-
gured as Momentary.
Settings
Button Type
• Momentary – When using a button.
• Toggle Switch – When using a switch.
• Reverse inputs - If you enable this option, the but-
tons On/Off position will be inverted.
Longpush Duration
• Min - the minimal time, that the button is pressed
and hold, in order to triger Longpush command.
Range (in ms): 100-3000
• Max - the maximum time, that the button is
pressed and hold, in order to triger Longpush com-
mand. Range for max (in ms): 200-6000
Multipush
The maximum time, between pushes, when trigger-
ing a multipush action. Range: 100-1000
Firmware Update
Update the rmware of Shelly, when a new version
is released.
Time Zone and Geo-location
Enable or Disable the automatic detection of Time
Zone and Geo-location.
Factory Reset
Return Shelly to its factory default settings.
Device Reboot
Reboots the Device
Device Information
• Device ID - Unique ID of Shelly
• Device IP - The IP of Shelly in your Wi-Fi network
Edit Device
• Device Name
• Device Room
• Device Picture
When you are done, press Save Device.
The Embedded Web Interface
Еven without the mobile app, Shelly can be set and
controlled through a browser and WiFi connection of
a mobile phone, tablet or PC.
Abbreviations Used:
• Shelly-ID – the unique name of the Device. It con-
sists of 6 or more characters. It may include num-
bers and letters, for example 35FA58.
• SSID – the name of the WiFi network, created by
the Device, for example shellyix3-35FA58.
• Access Point (AP) – the mode in which the Device
creates its own WiFi connection point with the re-
spective name (SSID).
• Client Mode (CM) – the mode in which the Device
is connected to another WiFi network.
Installation/Initial inclusion
Step 1
Install Shelly to the power grid following the
schemes described above and place it into the con-
sole. After turning the power on Shelly will create its
own WiFi network (AP).
WARNING! In case the Device has not created
its’ own AP WiFi network with SSID like shelly-
ix3-35FA58, please check if the Device is connected
accordingly to the Instalation Instructions. If you
still do not see an active WiFi network with SSID
like shellyix3-35FA58 or you want to add the Device
to another Wi-Fi network, reset the Device. You will
need to have physicall access to the Device. Press
and hold the reset button, for 10 seconds. After 5
seconds, the LED should start blinking fast, after 10
seconds it should blink faster. Release the button.
Shelly should return to AP mode. If not, please re-
peat or contact our customer support at:
support@
Shelly.cloud
Step 2
When Shelly has created an own WiFi network (own
AP), with name (SSID) such as shellyix3-35FA58.
Connect to it with your phone, tablet or PC.
Step 3
Type 192.168.33.1 into the address eld of your
browser to load the web interface of Shelly.
General - Home Page
This is the home page of the embedded web inter-
face. Here you will see information about:
• Input 1,2,3
• Current state (on/off)
• Power Button
• Connection to Cloud
• Present time
• Settings
Internet/Security
WiFi Mode - Client: Allows the device to connect to
an available WiFi network. After typing the details in
the respective elds, press Connect.
WiFi Client Backup: Allows the device to connect to
an available WiFi network, as a secondary (backup),
if your primary WiFi network becomes unavailable.
After typing the details in the respective elds, press
Set.
WiFi Mode - Acess Point: Congure Shelly to create
a Wi-Fi Access point. After typing the details in the
respective elds, press Create Access Point.
Cloud: Enable or Disable connection to the Cloud
service.
Restrict Login: Restrict the web interface of Shely
with a Username and Password. After typing the
details in the respective elds, press Restrict Shelly.
SNTP Server: You can change the default SNTP
server. Enter the address, and click Save.
Advanced - Developer Settings: Here you can
change the action execution via CoAP (CoIOT) or
via MQTT.
WARNING! In case the Device has not created
its’ own AP WiFi network with SSID like shelly-
ix3-35FA58, please check if the Device is connected
accordingly to the Instalation Instructions. If you
still do not see an active WiFi network with SSID
like shellyix3-35FA58 or you want to add the Device
to another Wi-Fi network, reset the Device. You will
need to have physicall access to the Device. Press
and hold the reset button, for 10 seconds. After 5
seconds, the LED should start blinking fast, after 10
seconds it should blink faster. Release the button.
Shelly should return to AP mode. If not, please re-
peat or contact our customer support at:
support@
Shelly.cloud
Settings
Longpush Duration
• Min - the minimal time, that the button is pressed
and hold, in order to triger Longpush command.
Range (in ms): 100-3000
• Max - the maximum time, that the button is
pressed and hold, in order to triger Longpush com-
mand. Range for max (in ms): 200-6000.
Multipush
The maximum time (in ms), between pushes, when
triggering a multipush action. Range: 100-1000.
Firmware Update
Update the rmware of Shelly, when a new version
is released.
Time Zone and Geo-location
Enable or Disable the automatic detection of Time
Zone and Geo-location.
Factory Reset
Return Shelly to its factory default settings.
Device Reboot
Reboots the Device.
Device Information
• Device ID - Unique ID of Shelly
• Device IP - The IP of Shelly in your Wi-Fi network
Input menu
Actions: Shelly i3 may send commands for control
of other Shelly devices, by using a set of URL end-
points.
All URL actions can be found at:
https://shelly-api-
docs.shelly.cloud/
• Button Switched ON: To send a command to an
URL, when the button is switched ON. Works only
when button is congured as Toggle.
• Button Switched OFF: To send a command to an
URL, when the button is switched OFF. Works only
when button is congured as Toggle.
• Button Short Press: To send a command to an
URL, when the button is pressed once. Works only
when button is congured as Momentary.
• Button Long Press: To send a command to an
URL, when the button is pressed and hold. Works
only when button is congured as Momentary.
• Button 2x Short Press: To send a command to an
URL, when the button is pressed two time. Works
only when button is congured as Momentary.
• Button 3x Short Press: To send a command to an
URL, when the button is pressed three times. Works
оnly when button is congured as Momentary.
• Button Short + Long Press: To send a command
to an URL, when the button is pressed once and then
pressed and hold. Works only when button is cong-
ured as Momentary.
• Button Long + Short Press: To send a command
to an URL, when the button is pressed and hold, and
then pressed again. Works only when button is con-
gured as Momentary.
Button Type
• Momentary – When using a button.
• Toggle Switch – When using a switch.
• Reverse inputs - If you enable this option, the but-
tons On/Off position will be inverted.
Hereby, Allterco Robotics EOOD declares that the
radio equipment type Shelly i3 is in compliance with
Directive 2014/53/EU, 2014/35/EU, 2004/108/WE,
2011/65/UE. The full text of the EU declaration of con-
formity is available at the following internet address:
https://shelly.cloud/declaration-of-conformity/
Manufacturer: Allterco Robotics EOOD
Address: Soa, 1407, 103 Cherni vrah Blvd.
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
Web: http://www.shelly.cloud
The User is obliged to stay informed for any amend-
ments of these warranty terms before exercising his/her
rights against the Manufacturer.
All rights to trademarks She® and Shelly® , and other
intellectual rights associated with this Device belong to
Allterco Robotics EOOD.