User Guide

LEGEND
AC Power supply (110V-240V):
N - Neutral (Zero)
L - Line (Phase)
DC Power supply (24V-60V):
N - Neutral ( - )
L - Possitive ( + )
I1, I2, I3 - Communication inputs
The WiFi switch input Shelly i3 may send commands
for control of other devices, over the Internet. It is
intended to be mounted into a standard in-wall con-
sole, behind power sockets and light switches or
other places with limited space. Shelly may work as
a standalone Device or as an accessory to another
home automation controller.
Specication
Power supply:
• 110-240V ±10% 50/60Hz AC
• 24-60V DC
Complies with EU standards:
• RE Directive 2014/53/EU
• LVD 2014/35/EU
• EMC 2004/108/WE
• RoHS2 2011/65/UE
Working temperature: – 40°C up to 40°C
Radio signal power: 1mW
Radio protocol: WiFi 802.11 b/g/n
Frequency: 2400 – 2500 MHz;
Operational range (depending on local construc-
tion):
• up to 50 m outdoors
• up to 30 m indoors
Dimensions (HxWxL): 36,7 x 40,6 x 10,7 mm
Electrical consumption: < 1 W
Technical Information
• Control through WiFi from a mobile phone, PC,
automation system or any other Device supporting
HTTP and/or UDP protocol.
• Microprocessor management.
CAUTION! Danger of electrocution. Mounting the
Device to the power grid has to be performed with
caution.
CAUTION! Do not allow children to play with the but-
ton/switch connected the Device. Keep the Devices
for remote control of Shelly (mobile phones, tablets,
PCs) away from children.
WiFi SWITCH INPUT
USER GUIDE
Introduction to Shelly®
Shelly® is a family of innovative Devices, which al-
low remote control of electric appliances through
mobile phone, PC or home automation system.
Shelly® uses WiFi to connect to the devices con-
trolling it. They can be in the same WiFi network or
they can use remote access (through the Internet).
Shelly® may work standalone, without being man-
aged by a home automation controller, in the local
WiFi network, as well as through a cloud service,
from everywhere the User has Internet access.
Shelly® has an integrated web server, through which
the User may adjust, control and monitor the Device.
Shelly® has two WiFi modes - access Point (AP) and
Client mode (CM). To operate in Client Mode, a WiFi
router must be located within the range of the De-
vice. Shelly® devices can communicate directly with
other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer.
Shelly® devices may be available for monitor and
control even if the User is outside the range of the
local WiFi network, as long as the WiFi router is con-
nected to the Internet. The cloud function could be
used, which is activated through the web server of
the Device or through the settings in the Shelly Cloud
mobile application.
The User can register and access Shelly Cloud, us-
ing either Android or iOS mobile applications, or any
internet browser and the web site:
https://my.Shelly.cloud/.
Installation Instructions
CAUTION! Danger of electrocution. The mounting/
installation of the Device should be done by a quali-
ed person (electrician).
CAUTION! Danger of electrocution. Even when the
Device is turned off, it is possible to have voltage
across its clamps. Every change in the connection
of the clamps has to be done after ensuring all local
power is powered off/disconnected.
CAUTION! Connect the Device only in the way
shown in these instructions. Any other method
could cause damage and/or injury.
CAUTION! Before beginning the installation please
read the accompanying documentation carefully
and completely. Failure to follow recommended pro-
cedures could lead to malfunction, danger to your
life or violation of the law. Allterco Robotics is not
responsible for any loss or damage in case of incor-
rect installation or operation of this Device.
CAUTION! Use the Device only with power grid and
appliances which comply with all applicable regula-
tions. short circuit in the power grid or any appliance
connected to the Device may damage the Device.
RECOMMENDATION! Тhe Device may be connected
(wirelessly) to and may control electric circuits and
appliances. Proceed with caution! Irresponsible atti-
tude could lead to malfunction, danger to your life or
violation of the law.
Initial Inclusion
Before installing/mounting the Device ensure that
the grid is powered off (turned down breakers).
Connect the Device to the power grid and install it
in the console behind the switch/power socket fol-
lowing the scheme that suites the desired purpose:
1. Connecting to the power grid with power supply
110-240V AC - g. 1
2. Connecting to the power grid with power supply
24-60V DC - g. 2
For more information about the Bridge, please visit:
http://shelly-api-docs.shelly.cloud/#shelly-fami-
ly-overview or contact us at: developers@shelly.
cloud
You may choose if you want to use Shelly with the
Shelly Cloud mobile application and Shelly Cloud
service. You can also familiarize yourself with the
instructions for Management and Control through
the embedded Web interface.
Control your home with your voice
All Shelly devices are compatible with Amazon Echo
and Google Home. Please see our step-by-step guide
on:
https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant
MOBILE APPLICATION FOR
MANAGMENT OF SHELLY®
Shelly Cloud gives you opportunity to control and ad-
just all Shelly® Devices from anywhere in the world.
You only need an internet connection and our mobile
application, installed on your smartphone or tablet.
To install the application please visit Google Play
(Android - left screenshot) or App Store (iOS - right
screenshot) and install the Shelly Cloud app.
Registration
The rst time you load the Shelly Cloud mobile app,
you have to create an account which can manage all
your Shelly® devices.
Forgotten Password
In case you forget or lose your password, just enter
the e-mail address you have used in your registra-
tion. You will then receive instructions to change
your password.
WARNING! Be careful when you type your e-mail
address during the registration, as it will be used in
case you forget your password.
First steps
After registering, create your rst room (or rooms),
where you are going to add and use your Shelly de-
vices.
Shelly Cloud gives you opportunity to create scenes
for automatic turning on or off of the Devices at
predened hours or based on other parameters like
temperature, humidity, light etc. (with available sen-
sor in Shelly Cloud). Shelly Cloud allows easy control
and monitoring using a mobile phone, tablet or PC.
Device Inclusion
To add a new Shelly device, install it to the power
grid following the Installation Instructions included
with the Device.
Step 1
After the installation of Shelly following the Instala-
tion Instructions and the power is turned on, Shelly
will create its own WiFi Access Point (AP).
WARNING! In case the Device has not created its’
own AP WiFi network with SSID like shelly-
ix3-35FA58, please check if the Device is connected
accordingly to the Instalation Instructions. If you
still do not see an active WiFi network with SSID
like shellyix3-35FA58 or you want to add the Device
to another Wi-Fi network, reset the Device. You will
need to have physicall access to the Device. Press
and hold the reset button, for 10 seconds. After 5
seconds, the LED should start blinking fast, after 10
seconds it should blink faster. Release the button.
Shelly should return to AP mode. If not, please re-
peat or contact our customer support at: support@
Shelly.cloud
Step 2
Choose “Add Device”.
In order to add more Devices later, use the app menu
at the top right corner of the main screen and click
“Add Device”. Type the name (SSID) and password
for the WiFi network, to which you want to add the
Device.
Step 3
If using iOS: you will see the following screen:
Press the home button of your iPhone/iPad/iPod.
Open Settings > WiFi and connect to the WiFi net-
work created by Shelly, e.g. shellyix3-35FA58.
If using Android: your phone/tablet will automatical-
ly scan and include all new Shelly Devices in the WiFi
network that you are connected to.
Upon successful Device Inclusion to the WiFi net-
work you will see the following pop-up:
I2
RESET
BUTTON
I1 N
L
I3 L
N
Power supply 110-240V AC
I2
RESET
BUTTON
I1 N
-
I3 L
+
Power supply 24-60V DC