Instructions

Initial Inclusion

Place Shelly into the power socket without any device/load

connected to the Shelly.

Press the Power Button. The LED should flash red/blue. This

means that Shelly is in AP mode. Press the Button again and

the LED will turn off. This means that Shelly is turned off.

LED States

• Blue flashing quickly - AP Mode

• Blue flashing slowly - STA Mode (no cloud)

• Blue still - STA Mode (connected to cloud)

• Red still - Relay On

• Red & Blue flashing quickly - FW Update

Some of the features of the Shelly Cloud mobile application

are available at https://my.shelly.cloud/ as well.

Control your home with your voice

All Shelly devices are compatible with Amazons’ Alexa and

Googles’ Assistant.

Please see our step-by-step guides on:

https://shelly.cloud/compatibility/Alexa

https://shelly.cloud/compatibility/Assistant