Instructions

7
After registering, create your rst room
(or rooms), where you are going to add
and use your Shelly devices.
Shelly Cloud gives you opportunity to
create scenes for automatic turning
on or off of the Devices at predened
hours or based on other parameters
like temperature, humidity, light etc.
Shelly Cloud allows easy control and
monitoring using a mobile phone, tablet
or PC.
Device Inclusion
To add a new Shelly device, plug it to
the power grid following the Installation
Instructions included with the Device.
Step 1
Plug your Shelly into the socket and
wait for the WiFi LED light to turn blue.
WARNING: If the WiFi LED does
not turn blue, press and hold the
Power Button for at least 5 seconds.
Watch at the color of the button. After
the button begins to blink red, release
it. The WiFi LED should then turn blue.
If not, please repeat or contact our cus
-
tomer support at: support@shelly.
cloud
Step 2
Choose “Add Device”.
In order to add more devices later, use
the app Menu at the top right corner of
the main screen and click “Add Device”.
Type the name (SSID) and password for
the WiFi network, to which you want to
add the Device.
Step 3
If using iOS: you will see the following
screen: