Instructions
15
Firmware Upgrade: Shows present rmware ver-
sion. If a newer version is available, ofcially an-
nounced and published by the Manufacturer, you
can update your Shelly device. Click Upload File to
install it to your Shelly device.
Device Reboot: Reboots the device.
Managing the Shelly Device
Relay 1 Screen
In this screen you can control, monitor and change
the settings for turning the power socket on and off.
You can also see the current status (electrical load/
power consumption) of the connected appliance to
Shelly, Buttons Settings, ON and OFF.
To control Shelly press Relay1:
To turn Shelly on press “Turn ON”.
To turn Shelly off press “Turn OFF”
Press the icon
> to go to the previous menu.
Shelly Power Management Settings
Each Shelly device can be congured individually. This lets you personalize each
Shelly device in a unique manner, or consistently, as you choose.
Power On Default State
This sets the socket’s default state when powered from the power grid.
ON: By default when the socket is powered and the connected appliance to it will
be powered as well.
OFF: By default the socket and any connected appliance will NOT be powered, even
when it is connected to the grid.
Restore Last State: By default the socket and the connected appliance will be re
-
turned to the last state they occupied (on or off) before the last power off/shut-
down.