Instructions

13
The Embedded Web Interface
Even without the mobile app the Shelly device can be set and controlled through a
browser and WiFi connection of a mobile phone, tablet or PC.
ABBREVIATIONS USED:
Shelly-ID – the unique name of the device. It consists of 6 or more characters. It
may include numbers and letters, for example 35FA58.
SSID – the name of the WiFi network, created by the device, for example shelly
-
plug-35FA58.
Access Point (AP) – the mode in which the device creates its own WiFi connection
point with the respective name (SSID).
Client Mode (CM) – the mode in which the device is connected to another WiFi
network.
Installation/Initial inclusion
Step 1
Plug the Shelly into the socket and wait the WiFi LED to turn blue.
WARNING: If the WiFi LED does not turn blue, press and hold the Power
Button for 5 seconds. Watch at the color of the Button. After the Button
begins to blink red, release it.
Step 2
When the WiFi LED turns blue, Shelly has created an own WiFi network (own AP),
with name (SSID) such as shellyplug-35FA58. Connect to it with your phone, tablet
or PC.
Step 3
Type 192.168.33.1 into the address eld of your browser to load the web interface
of the Shelly device.
General - Home Page
This is the home page of the embedded web interface. If it has been set up is cor
-
rectly, you will see information about:
• Current electrical consumption
• Settings menu button
• Current state (on/off)
• Present time