Instructions

8
automatic turning on or off of the Devices
at predefined hours or based on other
parameters like temperature, humidity, light
etc.
Shelly Cloud allows easy control and
monitoring by using a mobile phone, tablet
or PC.
Device Inclusion
To add a new Shelly Device, install it to
the power grid following the Installation
Instructions included with the Device.
Step 1
Mount the Relay into the switchboard and
turn the power on. In a few seconds Shelly
will turn on and will create its own WiFi
Access Point (AP).
WARNING: In case the Device has
not created its own WiFi network
with SSID like shellys4pro-35FA58 check if
you have connected Shelly correctly by the
schemes described above.
If you don’t see active WiFi network with
SSID like shellys4pro-35FA58 restart the
Device by one of these methods:
• Push the button next to the display and go
to the WiFi settings screen. Press and hold
the button for 5 seconds. A timer appears,
indicating the countdown to AP mode reset.
If not, please repeat or contact our customer
support at: [e-mail]
• Push the button next to the display and
go to the Device info screen. Press and
hold the button for 5 seconds. A timer
appears, indicating the countdown to
reset to factory defaults. If not, please
repeat or contact our customer support
at: [e-mail]
Step 2
Choose “Add Device”.
In order to add more Devices later, use the
app Menu at the top right corner of the main
screen and click “Add Device”. Type the name
(SSID) and password for the WiFi network, to
which you want to add the Device.
Step 3
If using iOS: you will see the following
screen: