Instructions

5
CAUTION! Before beginning the
installation please read the
accompanying documentation carefully
and completely. Failure to follow
recommended procedures could lead to
malfunction, danger to your life or violation
of the law. Allterco Robotics is not
responsible for any loss or damage in case
of incorrect installation or operation of this
Device.
CAUTION! Use the Device only with
power grid and appliances which
comply with all applicable regulations.
short circuit in the power grid or any
appliance connected to the Device may
damage the Device.
RECOMMENDATION: Тhe Device
may be connected to and may
control electric circuits and appliances only
if they comply with the respective standards
and safety norms.
RECOMMENDATION: The Device
may be connected with solid
single-core cables with increased heat
resistance to insulation not less than PVC
T105°C.
Initial Inclusion
Connect the Relay to the power grid and
install it in the switchboard as shown in the
scheme (fig. 1) and following the Safety
Instructions. Before installing/mounting the
Device ensure that the grid is powered off
(turned down breakers) and in compliance
with the Safety Norms.
You may choose if you want to use Shelly
with the Shelly Cloud mobile application
and Shelly Cloud service. You can also
familiarize yourself with the instructions
for Management and Control through the
embedded Web interface.
Control your home with your voice
All Shelly devices are compatible with Ama-
zon Echo and Google Home.
Please see our step-by-step guide on:
https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant