Instructions

4
Technical Information
• Control through WiFi from a mobile
phone, PC, automation system or any
other Device supporting HTTP and/or
UDP protocol.
• Microprocessor management.
• Controlled elements: 4 electrical circuits/
appliances.
• Controlling elements: 4 relays.
• Shelly may be controlled by an external
button/switch.
CAUTION! Danger of electrocution.
Plugging the Device to the power
grid has to be performed with caution.
CAUTION! Do not allow children to
play with the button/switch
connected the Device. Keep the remote
control Devices of Shelly (mobile phones,
tablets, PCs) away from children.
Introduction to Shelly
®
Shelly
®
is a family of innovative Devices,
which allows remote control of electric
appliances through mobile phone, PC or
home automation system. Shelly
®
uses WiFi
to connect to the Devices controlling it. They
can be in the same WiFi network or they can
use remote access (through the Internet).
Shelly
®
may work standalone, without being
managed by a home automation controller,
in the local WiFi network, as well as through
a cloud service, from everywhere the User
has an Internet access.
Shelly
®
has an integrated web server,
through which the User may adjust, control
and monitor the Device. Shelly
®
has two
WiFi modes - access Point (AP) and Client
mode (CM). To operate in Client Mode,
a WiFi router must be located within the
range of the Device. Shelly
®
Devices can
communicate directly with other WiFi
Devices through HTTP protocol.
An API can be provided by the Manufacturer.
Shelly
®
Devices may be available for monitor
and control even if the User is outside the
range of the local WiFi network, as long as
the WiFi router is connected to the Internet.
The Cloud function could be used, if it is
activated through the web server of the
Device or through the settings in the Shelly
Cloud mobile application.
The User can register and access the Shelly
Cloud, using either Android or iOS mobile
applications, or any internet browser and the
web site: https://my.Shelly.cloud/.
Installation Instructions
CAUTION! Danger of electrocution.
The mounting/installation of the
Device should be done by a qualified
person (electrician).
CAUTION! Danger of electrocution.
Even when the Device is turned off,
it is possible to have voltage across its
clamps. Every change in the connection of
the clamps has to be done after ensuring all
local power is powered off/disconnected.
CAUTION! Do not connect the
Device to appliances exceeding the
given max load!
CAUTION! Connect the Device only
in the way shown in these
instructions. Any other method could cause
damage and/or injury.