Instructions

3
Display
Home Screen – Shows the status of
the circuit (on/off) and current power
consumption.
WiFi settings
Mode: AP
Status: got ip
Ssid: shelly4pro-11C3F0
Ip: 192.168.33.1
Mac: 987BF311C3F0
Hold to reset to AP!
WiFi Settings – Shows: Mode, Status, SSID
(name of the network), IP and MAC address.
On this screen (fig.2), holding the button can
reset Shelly to Access Point (AP) mode.
WARNING! Even if the Device is in AP mode
and you have set your password, it will be
removed after resetting.
Device info
Firmware: 1.0
Hardware: 1.0
Model: Shelly4pro
Name: shelly4pro-11C3F0
Cloud: offline
Time: not synced
Hold to reset to factory!
Device Info – Shows: Firmware and
hardware versions, model and name of the
Device, connection to the Cloud, time. On
this screen (fig.3), by holding the button can
return Shelly to factory settings.
WARNING! When returning the Device
to factory settings, it will be in AP mode
without username and password. To
prevent unauthorized access to the Device
and connected appliances (circuits), please
connect Shelly to an existing WiFi network
or set your own password.
Status bar – It is available on all screens,
positioned at the top of the display. You
can see icons showing: Mode, Time
Synchronization and connection to the
Cloud service.
Status Bar Legend:
– Access Point (AP) mode
– Client mode (CM), missing
Internet connection
– Client mode (CM), available
Internet connection
– Missing Cloud connection
– Available Cloud connection
– Synchronized Time
– Turned off appliance (circuit)
– Turned on appliance (circuit)
fig. 2fig. 3