Instructions

15
Relay 1/Relay 2/Relay 3/
Relay 4 Screen
In this screen you can control, monitor and
change the settings for turning the power
on and off. You can also see the current
status of the connected appliance (electrical
load/ power consumption) to Shelly, Buttons
Settings, On and OFF.
To control Shelly press Relay1/Relay 2Relay
3/Relay 4:
To turn on the connected circuit press
“Turn ON”.
To turn off the connected circuit press
“Turn OFF”
Press the icon
to go to the previous menu.
Shelly Management Settings
Each Shelly Device can be configured
individually. This lets you personalize
each Shelly Device in a unique manner, or
consistently, as you choose.
Power On Default Mode
This sets the relays’ default state when
powered from the power grid.
ON: By default when the socket is powered
and the connected circuit/appliance to it will
be powered as well.
OFF: By default the socket and any
connected circuit/appliance will not be
powered, even when it is connected to the
grid.
Restore Last State: By default the relay
and the connected circuit/appliance will be
returned to the last state they occupied (on
or off) before the last power off/shutdown.
SWITCH: By default the Relay will operate
accordingly to the state of the switch/button
connected to Shelly.
Auto ON/OFF
Automatic powering/shutdown of the
socket and the connected appliance:
When ON – Auto OFF after: After turning on,
the power supply will be automatically shut
down after a predefined time (in seconds).
A value of 0 will cancel the automatic
shutdown.
When OFF – Auto ON after: After turning
off, the power supply will be automatically
turned on after a predefined time (in
seconds). A value of 0 will cancel the
automatic start.
Button Type
• Momentary: When using a button.
• Toggle Switch: When using a switch.
• Edge Switch: Shelly will change its state
on every push