Instructions

14
Settings – General Settings
In this menu, you can configure the Shelly
Device’s work and connection modes.
WiFi Settings – the WiFi connection
settings.
Access Point (AP) Mode: allows the Device
to operate as a WiFi access point. the
User can change the name (SSID) and the
password to access the WiFi. After you have
entered the desired settings, press Connect.
WiFi Client Mode (CM): allows the Device
to connect to an available WiFi network. in
order to switch to this mode, the User must
enter the name (SSID) and the password
to connect to a local WiFi network. After
entering the correct details, press Connect.
ATTENTION! If you have entered
incorrect information (wrong
settings, usernames, passwords etc.), you
will not be able to connect to Shelly. Please
restart the Device by using the above
description.
WARNING: Reset of the Device by
one of these methods:
• Push the button next to the display and go
to the WiFi settings screen. Press and hold
the button for 5 seconds. A timer appears,
indicating the countdown to AP mode reset.
If not, please repeat or contact our customer
support at: [e-mail]
• Push the button next to the display and go
to the Device info screen. Press and hold
the button for 5 seconds. A timer appears,
indicating the countdown to reset to factory
defaults. If not, please repeat or contact
our customer support at: support@Shelly.
cloud
Login: Access to the Device
Leave Unprotected - removing the
notification for disabled authorization.
Set Login – you can turn authentication on
or off
Username - A username set by you
Password - A password set by you
This is where you can change your
username and password. You must enter a
new username and the new password, then
press Save to save the changes.
Connect to Cloud: You can turn the
connection between Shelly and Shelly Cloud
on or off.
Factory reset: Return Shelly to its factory
settings.
Firmware Upgrade: Shows present firmware
version. If a newer version is available,
officially announced and published by the
Manufacturer, you can update your Shelly
Device. Click Choose File you to choose the
previously downloaded firmware update file.
Then click the Upload File to install it to your
Shelly Device.
Device Reboot: Reboots the Device.