Owner manual

26 | P a g e
OPERATION (CONTINUED)
7. Perform the following procedures to setup the BACTRONEZ workstation for use.
Setup the Gas Supply page 27
Single Gas Connection or Dual Gas Connection procedure page 28
Connecting to an In-House Vacuum System or Connect the Vacuum Pump page 29
Filling the Manometer page 29
Installing the Arm Port Doors page 29
Connecting the Foot Pedal Assembly page 30
Power the BACTRONEZ page 31
Establishing an Anaerobic Atmosphere page 32
Installing the Sleeve Assemblies page 34
Chamber Entry page 35
Verifying Anaerobic Atmosphere page 35
Exiting the Chamber page 37
Setting the Incubator Temperature page 39
Setting the Over Temperature Limit page 39