User guide

ManualsBrandsShellab ManualsHardware2002-S2E

CO2 TANK SWITCH

MODEL : 2002-S/2002-S2/2002-S2E

INSTALLATION AND INSTRUCTION MANUAL

Sheldon Manufacturing Inc. P.O. Box 627 Cornelius, Oregon 97113

EMAIL: tech@Shellab.com INTERNET: http://www.Shellab.com/~Shellab

1-800-322-4897 (503) 640-3000 FAX (503) 640-1366

Revised 11/2013

4861622

Summary of content (6 pages)

PAGE 1
CO2 TANK SWITCH MODEL : 2002-S/2002-S2/2002-S2E INSTALLATION AND INSTRUCTION MANUAL Sheldon Manufacturing Inc. P.O. Box 627 Cornelius, Oregon 97113 EMAIL: tech@Shellab.com INTERNET: http://www.Shellab.
PAGE 2
TABLE OF CONTENTS SECTION 1.0 INSTALLATION AND OPERATING INSTRUCTIONS SECTION 2.0 PARTS LIST AND WIRING DIAGRAM These units are for professional, industrial or educational use where the preparation or testing of materials is done at approximately atmospheric pressure and no flammable, volatile or combustible materials are being heated. These units are not intended for hazardous or household locations or use.
PAGE 3
1 Section INSTALLATION AND OPERATING INSTRUCTIONS Attach tubing from the gas tank regulators to the fittings marked GAS LINE IN on the rear panel of the TANK SWITCH. Attach a length of tubing from the fitting marked GAS LINE OUT to incubator. OPERATING INSTRUCTIONS Set regulators to proper operating pressures. Both regulators should be set to 15 psi. It does not matter which tank is attached to which input fitting. When one tank is empty, the gas line will change to the other tank automatically.
PAGE 4
2 Section PARTS LIST Description Audio Alarm Fuse 5 AMP MDA Latching Relay Momentary Switch On/Off Switch Power Cord, USA Pressure Switch Solenoid Valve Tank Indicator Pilot Light Transformer 220V to 115V 115V 220V 0250501 3300500 7030535 7850561 7850560 1800529 7850574 86005276 4650553 N/A 0250501 3300500 7030535 7850561 7860560 1800537 7850574 8600526 4650553 8350518
PAGE 5
WIRE DIAGRAM
PAGE 6
SHELDON MANUFACTURING, INC. LIMITED WARRANTY (Parts only, exclusive of labor) Sheldon Manufacturing, Inc., (“Manufacturer”) warrants for the original user of this product that all parts, not including finished goods products, it manufactures or resells will be free from defects in material and workmanship for a period of one year from the date of delivery of this product to the original user (the “Warranty Period”).