SDS

SAFETY DATA SHEET
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
Shell Rotella T6 15W-40
Version
1.0
Revision Date:
07/24/2018
SDS Number:
800010033090
Print Date: 07/25/2018
Date of last issue: -
2 / 17
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Other hazards
Other hazards which do not result in classification
Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin result-
ing in disorders such as oil acne/folliculitis.
Used oil may contain harmful impurities.
Not classified as flammable but will burn.
The classification of this material is based on OSHA HCS 2012 criteria.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature
:
Synthetic base oil and additives.
Highly refined mineral oil.
The highly refined mineral oil contains <3% (w/w) DMSO-
extract, according to IP346.
The highly refined mineral oil is only present as additive dilu-
ent.
* contains one or more of the following CAS-numbers: 64742-
53-6, 64742-54-7, 64742-55-8, 64742-56-9, 64742-65-0,
68037-01-4, 72623-86-0, 72623-87-1, 8042-47-5, 848301-69-
9.
Hazardous components
Chemical name
Synonyms
CAS-No.
Concentration (% w/w)
Alkyl borate
Not Assigned
0.1 -
0.99
Dialkyl alkaryl ami-
nomethyl dicarbox-
ylate
Not Assigned
0.1 -
0.99
Calcium sulphonate
Benzenesul-
fonic acid,
mono-C16-24-
alkyl derivs.,
calcium salts
70024-69-0
0.1 -
0.99
Alkaryl amine
bis(nonylphenyl
)amine
36878-20-3
1 -
3
Interchangeable low
viscosity base oil
(<20,5 cSt @40°C) *
Not Assigned
0 -
90
SECTION 4. FIRST-AID MEASURES
If inhaled
:
No treatment necessary under normal conditions of use.
If symptoms persist, obtain medical advice.
In case of skin contact
:
Remove contaminated clothing. Flush exposed area with wa-