SDS

S
A
FETY D
A
T
A
SHEET
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
7 / 14
US
Version 1.2 Revision Date: 07/30/2015 Print Date: 07/31/2015
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Clear, bright liquid.
Colour : amber
Odour : Slight hydrocarbon
Odour Threshold : Data not available
pH : Not applicable
pour point : -20 °C / -38 °FMethod: ASTM D97
Initial boiling point and boiling
range
: > 280 °C / 536 °F estimated value(s)
Flash point : 230 °C / 419 °F
Method: ASTM D92
Evaporation rate : Data not available
Flammability (solid, gas) : Data not available
Upper explosion limit : Typical 10 %(V)
Lower explosion limit : Typical 1 %(V)
Vapour pressure : < 0.5 Pa (20 °C / 68 °F)
estimated value(s)
Relative vapour density : > 1estimated value(s)
Relative density : 0.89 (15 °C / 59 °F)
Density : 890 kg/m3 (15.0 °C / 59.0 °F)
Method: ASTM D4052
Solubility(ies)
Water solubility : negligible
Solubility in other solvents : Data not available
Partition coefficient: n-
octanol/water
: Pow: > 6(based on information on similar products)
Auto-ignition temperature : >
320 °C / 608 °F
Viscosity
Viscosity, dynamic : Data not available