SDS
SAFETY DATA SHEET
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
Shell Rotella T4 Triple Protection 15W-40
Version
2.0
Revision Date:
05/22/2019
SDS Number:
800010026636
Print Date: 06/30/2021
Date of last issue: 05/22/2019
4 / 16
Methods and materials for
containment and cleaning up
:
Slippery when spilt. Avoid accidents, clean up immediately.
Prevent from spreading by making a barrier with sand, earth
or other containment material.
Reclaim liquid directly or in an absorbent.
Soak up residue with an absorbent such as clay, sand or other
suitable material and dispose of properly.
Additional advice
:
For guidance on selection of personal protective equipment
see Chapter 8 of this Safety Data Sheet.
For guidance on disposal of spilled material see Chapter 13 of
this Safety Data Sheet.
SECTION 7. HANDLING AND STORAGE
Technical measures
:
Use local exhaust ventilation if there is risk of inhalation of
vapours, mists or aerosols.
Use the information in this data sheet as input to a risk as-
sessment of local circumstances to help determine appropri-
ate controls for safe handling, storage and disposal of this
material.
Advice on safe handling
:
Avoid prolonged or repeated contact with skin.
Avoid inhaling vapour and/or mists.
When handling product in drums, safety footwear should be
worn and proper handling equipment should be used.
Properly dispose of any contaminated rags or cleaning mate-
rials in order to prevent fires.
Avoidance of contact
:
Strong oxidising agents.
Product Transfer
:
Proper grounding and bonding procedures should be used
during all bulk transfer operations to avoid static accumulation.
Further information on stor-
age stability
:
Keep container tightly closed and in a cool, well-ventilated
place.
Use properly labeled and closable containers.
Store at ambient temperature.
Packaging material
:
Suitable material: For containers or container linings, use mild
steel or high density polyethylene.
Unsuitable material: PVC.
Container Advice
:
Polyethylene containers should not be exposed to high tem-
peratures because of possible risk of distortion.
SECTION 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Components with workplace control parameters