SDS
SAFETY DATA SHEET
1. Identification
Product identifier
SHEETROCK® Brand First Coat Primer
Other means of identification
SDS number
60000010002
Synonyms
Primer
Recommended use
Interior use.
Recommended restrictions
Use in accordance with manufacturer's recommendations.
Manufacturer / Importer / Supplier / Distributor information
Company name
United States Gypsum Company
Address
550 West Adams Street
Chicago, Illinois 60661-3637
Telephone
1-800-874-4968
Website
www.usg.com
Emergency phone number
1-800-507-8899
2. Hazard(s) identification
Not classified.
Physical hazards
Not classified.
Health hazards
Not classified.
OSHA defined hazards
Label elements
None.
Hazard symbol
Signal word
None.
Hazard statement
None.
Precautionary statement
Prevention
Observe good industrial hygiene practices.
Response
Get medical attention/advice if you feel unwell.
Storage
Store as indicated in Section 7.
Disposal
Dispose of in accordance with local, state, and federal regulations.
Not classified.
Hazard(s) not otherwise
classified (HNOC)
3. Composition/information on ingredients
Mixtures
1317-65-3 < 10Limestone
CAS number %Chemical name
12001-26-2 < 5Mica
13463-67-7 < 5Titanium dioxide
Composition comments
All concentrations are in percent by weight unless ingredient is a gas.
Since this product is a liquid slurry, the risk of inhaling particles will not occur during the
recommended use of this product.
4. First-aid measures
Inhalation
Exposure to mists may cause temporary irritation to eyes, skin, nose, throat, and upper respiratory
tract. Move injured person into fresh air and keep person calm under observation. Get medical
attention if symptoms persist.
Skin contact
Rinse area with plenty of water. Get medical attention if irritation develops or persists.
Eye contact
Do not rub eyes. Flush thoroughly with water for at least 15 minutes. If burning, redness, itching,
pain, or other symptoms develop or persist get medical attention.
Ingestion
Rinse mouth. Get medical attention if symptoms occur.
SHEETROCK® Brand First Coat Primer SDS US
917159 Version #: 01 Revision date: - Issue date: 17-January-2014
1 / 6






