Selling Sheet

TILE & STONE
COLISEUM
**Polished product is not pre-sealed and requires sealing prior to and again after grouting.
Style Number CS90Q CS91Q CS89Q CS92Q CS93Q CS94Q CS95Q
Construction porcelain porcelain porcelain porcelain porcelain porcelain porcelain
Tile Type floor tile
polished**
floor tile
matte
floor tile
matte
floor tile
matte
bullnose
polished**
bullnose
matte
basketweave
mosaic
matte
Tile Size 12" × 24" 12" × 24" 18" × 36" 6" × 36" 3" × 12" 3" × 12" 12" × 12" × 2"
Edges rectified — rectified rectified — — —
Technical
Wear Rating Group 4 4 4 4 4 4 4
Break Strength > 292 lbs. > 292 lbs. > 292 lbs. > 292 lbs. > 292 lbs. > 292 lbs. > 292 lbs.
Water Absorption %
< 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5
DCOF < 0.42
> .5 > 0.5 > 0.5 < 0.42 > 0.5 > 0.5
Shade Variation V2 V2 V2 V2 V2 V2 V2
Installation Area Floors, Walls,
Exteriors*
Floors, Walls,
Exteriors
Floors, Walls,
Exteriors
Floors, Walls,
Exteriors
Floors, Walls,
Exteriors*
Floors, Walls,
Exteriors
Floors, Walls,
Exteriors
* exterior wall only for polished product
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of
> 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North
America’s website: www.tcnatile.com
MANUFACTURER’S WARNING:
- Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface
where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery
resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use
on ramps.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection
should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Colors
100 Shell 500 Pewter 550 Coal 700 Toast
CS95Q mosaic 12" × 12" × 2"
100 Shell 500 Pewter 550 Coal 700 Toast
shawfloors.com
direct 03.14.2019
HS-317901-18