Selling Sheet
TILE & STONE
CASINO POLISHED
Nano sealed — does not require sealing on most normal applications
Uses the chemical method as described above. Suitable for most residential, but commercial may benefit
from a sealer application. Sealer recommended if using a high-performance or contrasting grout color.
Style Number CS37V CS88Z CS89Z CS87Z CS36V CS35V
Construction porcelain porcelain porcelain porcelain porcelain porcelain
Tile Type floor tile
polished
floor tile
matte
floor tile
polished
floor tile
matte
floor tile
polished
floor tile
polished
Tile Size 24" × 24" 16" × 32" 16" × 32" 12" × 24" 12" × 24" 4" × 12"
Edges rectified rectified rectified rectified rectified rectified
Technical
Wear Rating Group 4 4 4 4 4 4
Break Strength
> 500 lbs. > 500 lbs. > 500 lbs. > 450 lbs. > 500 lbs. > 500 lbs.
Water Absorption
< 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5
DCOF < 0.42 > 0.42 < 0.42 > 0.42 < 0.42 < 0.42
Shade Variation V2 V2 V2 V2 V2 V2
Installation Area Floors, Walls,
Exteriors*
Floors, Walls,
Exteriors
Floors, Walls,
Exteriors*
Floors, Walls,
Exteriors
Floors, Walls,
Exteriors*
Floors, Walls,
Exteriors*
*exterior wall only for polished product
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of
> 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North
America’s website: www.tcnatile.com
MANUFACTURER’S WARNING:
- Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface
where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery
resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use
on ramps.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection
should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Colors
121 Calacatta 151 Statuario *155 Zebrino (not available in CS37V)
200 Allure 500 Stella
shawfloors.com
direct 03.14.2019
HS-317901-18