Selling Sheet

Benefits
Colors
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of >
0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North
America’s website: www.tcnatile.com
MANUFACTURER’S WARNING:
- Tiles with DCOF AcuTest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking
surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly
slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for
use on ramps.
- For additional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final
selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with
ANSI A137.1 standards.
SAN FRANCISCO
Trims available in all colors
CS66M corner
4"
2.6"
5.4"
CS67M
Stair tread
720 Nob Hill720 Nob Hill
500 Lombard
720 Nob Hill
620
Pacific Heights
620
Pacific Heights
620
Pacific Heights
100 Presidio 100 Presidio 500 Lombard500 Lombard
100 Presidio
CS65M hexagonCS64M 4" × 8" brick CS76M deco mix
Style Number CS65M CS64M CS76M CS33H CS66M CS67M
Construction color body
porcelain
color body
porcelain
color body
porcelain
color body
porcelain
color body
porcelain
color body
porcelain
Tile Type floor floor deco mix bullnose corner tile stair tread
Tile Size 9.6" × 11"
hexagon
4" × 8"
brick
4" × 8" 4" × 8" 4" × 2.6" × 5.4" 4" × 16"
Technical
Wear Rating Group 4 4 4 4 4 4
Break Strength > 500 > 500 > 500 > 500 > 500 > 500
Water Absorption < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5
DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 > 0.42
Shade Variation V3 V3 V3 V3 V3 V3
TILE & STONE
shawfloors.com
direct 06.22.2018
HS-249351-18