Selling Sheet

TILE & STONE
SAVANNAH
Style Number CS32V
Construction porcelain
Tile Type floor tile
Tile Size 8" × 48"
Technical
Wear Rating Group Multiple*
Break Strength
> 500
Water Absorption % < 0.3
DCOF
> 0.42
Shade Variation V2
Installation Area Floors, Walls, Exteriors
* colors 100 and 150 – 4; all other colors – 3. Wear rating 3 not suggested for exterior floor application.
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60
referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s
website: www.tcnatile.com
MANUFACTURER’S WARNING:
- Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface
where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery
resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on
ramps.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection
should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Colors
100 Pearl 150 Sand 200 Honey 500 Silver
shawfloors.com
direct 03.14.2019
HS-317901-18