Selling Sheet

shawfloors.com direct 03.07.2018
TILE & STONE
CAMEO
Colors
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of
> 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of
North America’s website: www.tcnatile.com
MANUFACTURER’S WARNING:
- Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking
surface where water, ice, oil, great and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly
slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for
use on ramps.
- For additional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final
selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI
A137.1 standards.
Benefits
Style Number CS09X CS08X CS07X CS11X CS10X
Construction ceramic ceramic ceramic ceramic ceramic
Tile Type floor tile floor tile floor tile bullnose mosaic
Tile Size 12" x 24" 17" x 17" 13" x 13" 2.75" x 13" 13" x 13" x 2"
Technical
Wear Rating Group 4 4 4 4 4
Break Strength 300 lbs 300 lbs 300 lbs 300 lbs 300 lbs
Water Absorption 3% 3% 3% 3% 3%
DCOF
> 0.42 > 0.42 > 0.42 > 0.42 > 0.42
Shade Variation V3 V3 V3 V3 V3
550 Quartz500 Agate
700 Jasper