Installation Instructions

35
CRI 105 - STANDARD For INSTALLATION of RESIDENTIAL CARPET Copyright © 2019 by The Carpet and Rug Institute, Inc.
Residential Carpet Tile
17.4
Tile Joints
Tile in the completed installation should be tight but not compressed. To insure proper
spacing when installing carpet tile, measure the distance covered by 10 tiles installed on the
floor with no visible gaps, peaks or overlaps. The measurement should be equal to 10 times
the tile size +/- 1/4 inch unless otherwise stated in the manufacturer specifications. This
measurement is an indication of correct placement of tiles to prevent compression or gaping
between tiles. Take care not to trap yarn between tiles.
17.5
Rolling
Refer to manufacturer recommendation for roller weight. Rolling, if required, should be
performed to press the tile into the adhesive.
17.6
Post Installation
Refer to Broadloom Carpet > Direct Glue Down > Post Installation section of this document.