Specification Sheet
NOBLE WBN
A DCOF value of > 0.42 is the new standard for tiles specied for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of >
0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North
America’s website: www.tcnatile.com
MANUFACTURER’S WARNING:
- Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking
surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become
unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for
use on ramps.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final
selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI
A137.1 standards.
Style Number 307TS
Construction Ceramic
Tile Type Trim
Tile Size 2.95" x 11.81" | 7.5 cm x 30 cm
Edges Pressed
Installation Area Walls
Technical
Wear Rating Group N/A
Break Strength N/A
Water Absorption % 10.00
DCOF N/A
shawoors.com
For reference purposes only if printed or downloaded.