Selling Sheet

TILE & STONE
Style Number 221TS 220TS 219TS 222TS 238TS
Construction ceramic ceramic ceramic ceramic ceramic
Tile Type floor tile floor tile floor tile bullnose mosaic
Tile Size 12" × 24" 17" × 17" 13" × 13" 2.75" × 13" 13" × 13" × 2"
Technical
Wear Rating Group 4 4 4 4 4
Break Strength 350 lbs. 350 lbs. 350 lbs. N/A N/A
Water Absorption % 3–6 3–6 3–6 3–6 3–6
DCOF
> 0.42 > 0.42 > 0.42 > 0.42 > 0.42
Shade Variation V2 V2 V2 V2 V2
Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60
referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s
website: www.tcnatile.com
MANUFACTURER’S WARNING:
- Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface
where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery
resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on
ramps.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection
should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Colors
100 Bone 150 Silver 500 Grey
ARENA
shawfloors.com
direct 06.06.2019
HS-317901-18