Owner Manual

MAINTENANCE GUIDELINES
SPOT AND SPILL REMOVAL
Remove wet spills promptly by blotting with white paper or cloth towels.
Dried spots should be removed by Shaw Total Care Hard Surface Cleaner with gentle agitation from a clean towel or cloth. Always blot dry.
Do not use detergents or abrasive cleaners since these products can result in a dull residue and appearance.
Use rubbing alcohol (isopropyl alcohol) with a clean white cloth for spots requiring a solvent type cleaner that hardwood cleaning agents cannot
remove.
Please note that some stain conditions may become permanent.
2
shawoors.com
For reference purposes only if printed or downloaded. Revision: 02202020