Installation & Assembly

LayoutofthePlank:



a. Carefullyplacethefirstpieceof plankatthejunctionofthechalklines.

b. Continuetolaytheplank,makingsureeachplankflushagainstthechalklineandtightagainsttheadjoiningplank.

c. Makesurethe  plank iswellseatedintothe adhesivepayingspecialattention,totheedges.Lay rowbyrow, orinapyramidfashion as

shownbelow.



FittingtheBorder:

a. Measurethedistancefromthelastplankintherowtothewall.

b. Marktheplankandcutitagainstthemark.

c. Laytheplankinplace,maki

ngsurethatthecutedgeisagainstthewall.

FittingAroundIrregularObjects:

a. Makeapatternoutofheavypapertofitaroundpipesandotherirregularities.

b. Placethepatternontheplank,tracecutting alongthetracelines.

IMPORTANT:Allflooringmustbyrolledwithaminimum100‐lbrollerafterinstallation.Useahandrollerinareasnotreachedwitha100‐lb.

roller.

7.LIMITEDWARRANTY

Forcompletewarrantyinformation,pleasecall–ShawInformationCenter:1800.441.7429

Shaw Industries Group, Inc., a Berkshire Hathaway Company. RevisedLD031218

For reference purposes only if printed or downloaded.