MSDS
Page 2 of 5 Revision A October 1, 2016
Warning! Rupture risks: Metal Halide lamps can be constructed of an outer glass bulb with an internal arc-tube.
Metal Halide arc-tubes operate at high pressure and at very high temperatures and can unexpectedly rupture due
to internal causes or external factors such as a ballast failure or misapplication. An arc-tube rupture can burst and
shatter the outer glass bulb resulting in the discharge of glass fragments and extremely hot particles. In the event
of such rupture, there is a risk of personal injury, property damage, burns and fire.
To reduce these risks:
Only operate with compatible ballast and fixture. (See catalog for specific information.)
Only operate lamp in designated operating positions. (See catalog for illustration.)
Never expose operating lamp to moisture (such as rain, sleet or snow).
Replace lamp if outer glass bulb is scratched, cracked or damaged in any way.
Electrically insulate any metal support in contact with the outer glass bulb to avoid glass decomposition.
Replace lamp at or before the end of rated life. (See catalog for rated life.)
For applications where an additional measure of safety is desired, lamps using an internal shield designed to contain
an arc-tube rupture are available.
Warning! Electrical shock and burn hazard: Do not remove or insert lamp while power is on. If outer glass
bulb is broken, shut off power immediately and remove lamp after it has cooled.
Warning! Ultraviolet radiation exposure: This lamp can cause serious skin burn and eye inflammation from
shortwave ultraviolet radiation if the outer envelope of the lamp is broken or punctured. Do not use where people
will remain for more than a few minutes unless adequate shielding or other safety precautions are used. Lamps
that will automatically extinguish when the outer envelope is broken or punctured are commercially available.
This product conforms to the following federal regulations: U.S.A.: 21 CFR 1040.30 and CANADA: SOR/80-
381.
Immediately shut power off and replace lamp. If the outer jacket is broken and the lamp continues to operate,
ultraviolet radiation may be emitted which may cause skin and eye irritation with prolonged exposure.
If irritation persists: get medical attention.
Do not handle until all safety precautions have been read and understood. Care must be taken to read and
follow the directions and warnings accompanying the specific product to avoid personal injury and/or property
damage.
Storage: Store in well-ventilated place.
Consult the SYLVANIA product catalog or relevant technical data sheets for complete warnings, operating
and installation guides for specific lamp types.
-------------------------------------------------------------------------------------------------------------------------------------------------
III. COMPOSITION – INFORMATION ON INGREDIENTS
------------------------------------------------------------------------------------------------------------------------------------------------
There are no known health hazards from exposure to lamps that are intact.