Please read this manual carefully before operating REV: 1.
Warnings Maintenance and Clean Please check the package whether any damage is caused by transportation after you got the lights. If there is any damage, please do not use this fixture, and contact the dealer or manufacturer as soon as possible. 1. This product is only suitable for professional use, and does not apply to security for other purposes. 2. Be cautious to prevent the impact that is caused by the device.
Fault checking and repair) No. 1 Fault Checking Fault description Not work,no light output and the fan doesn't work 1.Check power connection and see if the fuse is OK 2.Check if voltage value is in the normal range 3.Check power switch and disply screen on or off 1.DMX signal light must be on, if not, to check the connection 2. If DMX signal light is on, but no reaction to the channel, to check if the address code setting is correct? 2 3 4 One of channel blocked 3.
11 Channel Channel 1 2 3 4 5 Fan Power DNX output 6 DMX input Internet Connector 12345678 1 23 7 8 9 10 12345678 1 23 Power DNX output Fan DMX input Button description 11 Function Horizontal rotation Horizontal trimming Vertical operation Vertical trimming Color 0-139 140-255 Gobo 0-63 64-127 128-255 Strobe Dimming Rotation speed Auto-play mode 0-59 60-84 85-109 110-134 135-159 160-184 185-209 210-234 235-255 Reposition Deacription 0-255 0-255 0-255 0-255 Color selection Automatic color swit
14. Description 1. When setting under the hold mode, first thing is to unplug the signal cable and wait for 30 seconds, then turn off the power. The system saves the last 512 signal automatically. 2. Under DMX mode: Pls set to LS1, DMX mode and bLAc: No 512 signal , digital back to zero or HLod: No 512 signal remains the last DMX status got valid operation. 3. Soud mode switch setting only valid by MAST 4.
5.Sound This option is for “On” and “OFF” setting to sound mode. Press button “MENU”, select Sound, press “Enter” to start setting, press button “UP” and “Down” to select “ON” or “OFF”, then press button “Enter” to preserve, automatic exit in 10S. 6.SEnS This option is for adjusting sound sensibility.
