Item Brochure


Clear Control 3D
™
Blade

Standard Bevel-Up Slit Blade
Clear Control 3D
™
Knife vs. Standard Slit Knife
1
1
Comparative study on file of Surgical Specialties Corporation knives. Average values reported.
2
Single pass measured in grams.
Sharpoint
™
Clear Control 3D
™
slit knives are designed to facilitate instrument insertion through a multi-dimensional incision. Micro bevels are
designed to add vertical dimension, placing less stress on wound margins, allowing for instrument insertion and manipulation. 6 per box.
Knife Blade/Tip Description
72-1050 • 1.0mm Angled, full handle
72-1550 • 1.5mm Angled, full handle
72-1650 • 1.6mm Angled, full handle
72-1850 • 1.8mm Angled, full handle
72-2050 • 2.0mm Angled, full handle
72-2250 • 2.2mm Angled, full handle
72-2450 • 2.4mm Angled, full handle
72-2550 • 2.5mm Angled, full handle
72-2650 • 2.65mm Angled, full handle
72-2750 • 2.75mm Angled, full handle
72-2850 • 2.85mm Angled, full handle
72-3050 • 3.0mm Angled, full handle
72-3250 • 3.2mm Angled, full handle
Clear Control 3D
™
Slit Knives
35% Lower Penetration Force Required
11.3
2
17.4
2
22% Thinner
0.17mm
0.13mm
Surgical Specialties Corporation, 100 Dennis Drive, Reading, PA 19606, U.S.A.
610.40 4.3520 • 877.991.1110 (USA and Canada only) • Fax: [phone] • OPG-PM-437R1 10 /13
Clear Control 3D™, Sharpoint™, The Surgeon’s Edge™, and Infinite Edge™ are trademarks
of Surgical Specialties Corporation.
©2013 Surgical Specialties Corporation. All Rights Reserved.
Penetration Force and Blade Thickness
For more information or to place an order, contact your local
Sharpoint™ sales representative or our customer service team at:
87 7.9 91.1110
(USA and Canada only), +1.610.404.3520 (International),
or visit Sharpoint.com
3
Sharpness is one thing, control is everything
Clear Control
3D
™
Phaco Incision Knives
Penetration Force and Blade Thickness
Knives
SurgicalSpecialties.com