MODEL TI150 Wrinkle-Free Steamer 350 The Embarcadero, Sixth Floor San Francisco, CA 94105-1218 Tel: 1-800-344-4444 www.sharperimage.com Please read all instructions before use.
Dear Sharper Image Customer, Thank you for your purchase of a Sharper Image product. We appreciate your business very much. Our goal is that you will be completely satisfied with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products. Since 1977, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoyable.
TROUBLESHOOTING GUIDE PROBLEM Unit fails to heat up. Unit heats up, but fails to steam. Steam output is intermittent. POSSIBLE CAUSE IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. SOLUTION Unit is not plugged in. Plug into electrical outlet. Household Circuit Breaker / Ground Fault Interrupter has tripped or blown a fuse.
CARE AND STORAGE GUIDELINES IMPORTANT SAFEGUARDS WARNING: To reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature. 9. In order to unplug TI150 Wrinkle-Free Steamer, grasp plug and pull smoothly and firmly from outlet.
USING THE WRINKLE-FREE STEAMER STEAMING LINENS & FABRICS WRINKLE-FREE STEAMER PRODUCT INFORMATION The following features and accessories are included with your Fabric Steamer. Carefully inspect packaging material for all parts and accessories before discarding. NOTE: Be sure that Water Reservoir has already been filled before following these steps. Also be sure that Rubber Accessory Housing is connected along with the Fabric Brush or Lint Remover, to reduce excessive water spitting from the Steam Nozzle.
WRINKLE-FREE STEAMER PRODUCT INFORMATION • The Steam Nozzle (1) emits a flow of hot, penetrating steam. • The Water Reservoir Cap (2) safely contains steam within the Water Reservoir, and must be removed in order to fill the unit with water. • The Heater Indicator Light (3) illuminates when the unit’s heater is active. • The Handle (4) is designed to stay relatively cool while providing the optimum amount of safety and user comfort.
