Operating instructions

(3). To turn out of range alarm tone on/off
1). In standby mode, press
button to enter handset setting mode,
press or button to find " HS SETTINGS"
2).
3). press
button to enter next step handset setting
press or button to find "TONE SETUP"
4).
5). press
button to confirm, display show "KEY TONE"
press or button to find "RANGE ALARM"
6).
The balance setting is same as " "
To turn key tone on/off
step 6 ~10.
If you have a
or
system, you already have two,
three or
You can have
up to
5 handsets
registered to the base unit, as numbers
1, 2, 3, 4 or 5
with more than one handset registered to your base unit, you can
> make intercom calls
from one handset to another handset
make an
intercom call
while you are on an outside call

transfer
an outside call from one handset to another or to the corded base
set up a
three-way conference call
between yourself, an outside call and
another handset
Each handset has its own number
1, 2, 3, 4 or 5 which is shown at the lower left corner
Quad
CH-D707 Twin, Triple
To use a multi-handset system
>
>
>
like as "HS-- 1".
four handsets.
Please note :
Among these handsets registered to the base, only one outside call and two
calls can take place at the same time.
When a cordless handset is using the outside line,
the other
will show icon " " in standby mode, if you want to get line , handset will give a
intercom
handsets
alert tone and then display "LINE BUSY" a moment, then drop line automatically.
but other handsets can still make a intercom call.
To make an internal call
1).
Press
button on handset1, you hear
a constant tone in the earpiece
and

handset 1
will show "HS ? 2, 3, 4"(if base unit registered 4 handset), handset 1 also show icon
2).
Key in the number of other handset
(for instance 2)
The called handset 2 will ring and the display
For instance, HS1 make intercom call to HS2
( icon blinks )
3). Press button on handset 2 to answer the intercom call, the two handset enter internal
handset 1 will show "CALLING HS 2".
will show "HS1 CALLING".
talk mode, handset start to calculate internal talk time, icon will be steady on display.
4).
press button to end internal call on any handset.
To transfer an outside call
When you've
made or answered an outside call, you can transfer the call to another handset .
**For instance, HS1 transfer an outside call to HS2
~22~