Operating instructions

To adjust ringing volume for external calls
1). In standby mode, press
button to enter handset setting mode,
press or button to find " HS SETTINGS"
2).
3). press
button to enter next step handset setting,
press or button to find "RING SETUP",
4).
5). press
button to confirm selection, display will show "EXT RING",
6). press
button to confirm, display will show "MELODY" ,
8). press
button , display will show "VOLUME 3"(default setting of factory)
press or button to scroll volume 1 to 5 and "volume off"
9).
10). press
button to confirm melody setting
11).
press button to exit present setting and return to previous menu.
12).
press button to return to standby mode.
7). press
button , display will show "VOLUME " ,
handset will pre-play ring melody to tell ring level.
To set handet TONES
There are three handset tones that can be turned on or off via the handset menu.
All of these tones are "ON" by default.
(2). To turn battery low alert tone on/off
(1). To turn key tone on/off
1). In standby mode, press
button to enter handset setting mode,
press or button to find " HS SETTINGS"
2).
3). press
button to enter next step handset setting,
press or button to find "TONE SETUP",
4).
5). press
button to confirm, display show "KEY TONE",
6). press
button to enter the selection, display will show "ON"
press or button to turn key tone "ON" or "OFF",
7).
8). press
button to confirm the selection.
9).
press button to exit present setting and return to previous menu.
10).
press button to return to standby mode.
1). In standby mode, press
button to enter handset setting mode,
press or button to find " HS SETTINGS"
2).
3). press
button to enter next step handset setting,
press or button to find "TONE SETUP"
4).
5). press
button to confirm, display show "KEY TONE"
press or button to find "BATTERY LOW"
6).
The balance setting is same as " "
To turn key tone on/off
step 6 ~10.
Please note battery low alert tone only work during talk mode, in standby mode,
if battery low, only battery icon flashes.
~21~