Operating instructions

While handset in "off" mode,Press and hold the
button for 3s to turn
handset 'ON'.
In standby mode, press and hold the
button
for 3 seconds
to turn
handset 'OFF'.
** Y ou can switch handset off
to save battery
.
1.
2.
Note: To answer a call when the handset is switched off, you need to switch it
back on. It may take a few moments for the handset to re-establish a radio link
with the base unit(and handset will give a tone to tell "link-up").
** When the handset is in "off" mode, the unit can not be used
for emergency calls.
In standby mode,Press and hold "
" button for 3 seconds till the icon
appears on the display, all of handset keys are locked (except " " button) .
To lock
To unlock
*
While handset key locked, press and hold " " button for 3s, handset will
give a "du" tone, then unlock the keys, icon will disappear .
** Note: 1). while handset keys locked, you can not make any emergency call s.
2). while handset keys locked, you still can answer calls when handset is ringing.
In standby mode, press and hold key on base unit to set the time of base alarm
ALARM 2
clock 2, till the right clock icon start blinking, and "hour" digit also start flashing , press "UP" or
"DOWN" button to adjust "hour" to your desired value, then briefly press key again,
ALARM 2
press "UP" or "DOWN" button to adjust "minute" to your desired value, then briefly press
key ,LCD display will return to previous time(which is running) and base will sound
a "du" tone to inform alarm clock 1 is set.
Note : 1). during clock setting, long press "UP" or "DOWN" key to adjust the digit continuously.
2 ). in base standby mode, shortly press key to switch "alarm 2" ring on/off,
while the
right clock icon lights, "alarm 2" ring is switched on.
ALARM 2
ALARM 2
ALARM 2
2. base alarm tone snooze on/off
While alarm 1 or 2 is switched on, and running time come to set time , base will ring with alarm
tone, and you can shut off the ringer tone by shortly pressing "SNOOZE" button,
otherwise ring will last 10s and will repeat at 5 minutes interval.
3. Set handset alarm
In standby mode, press  button to enter setting mode.
1).
2).
press button to select "HS SETTINGS",
3).
press button to enter handset function setting,display will show "ALARM"
4).
press button to enter the selection, it will show "OFF"(extra-factory setting).
6).
press button to confirm the selection, handset display will show 00...00
7).
press button to confirm the setting, display will show "SNOOZE ON"
9).
press button to go back to stand-by mode.
press button to select "ON",
5).
and cursor will blink to let you to set alarm time (from left to right).
and clock icon (you can press button to select "SNOOZE OFF, )
8).
press button to confirm the selection
** When "SNOOZE ON" is selected, alarm tone will repeat at
5 minutes interval.
if "SNOOZE OFF" is selected, alarm tone ring only sounds once.
To lock/unlock keypad
To switch on /off handaset power
"minute" digit start flashing,
~11~