Instruction manual
TM
Ouick Reference Guide
below
77"
F
d
lips
6
Tricks on Holu to Use Yon Interactive R2-D2 Robot
Pouering
Up
1.
Ensure R2 is assembled and batteries are installed per operation manual.
2. After you turn the master Power Control Switch on, R2 will need to warm up for 30-45 seconds. You will know he's
warming up because his
Droid mood Status Indicator will flash between red and blue. During that time, he will not fully
respond to your commands.
3.
Press the Wheel-Lock Control Button to unlock the wheels [glows red when the wheels are locked].
INER use
A2 outside. INER use R2 near stairs. Only use R2 on a table when his wheels are locked.
Communicating
ui
th
R2
It can take some time to get used to communicating with R2. Following are some tips to help you get started. neter to the
manual for more detailed information.
1.
R2 responds best when in a quiet environment.
2. Speak slowly and clearly so R2 understands
-
-
you.
3.
Leave time between each command so R2 can acknowledge you with a beep. For example: Say 'Hey R2".
.
.Art00 will
respond with a series of beeps. Ben say "tame mode".
.
.beeps.. .Then say "Dance Program."
4.
R2 may start talking or moving without a command from you. This may happen because:
-
R2 likes to talk.
-
He did not understand you.
-
He is responding to other sounds or voices in the room.
5.
R2 cannot hear you when he is moving or speaking.
Helpful
Hints
Ulith time you will understand that R2's different beeps and whistles represent "yesI1' 'noIt1 or
'I
don't understand." If you
aren't sure what
A2 is saying, use the commands below.
1.
R
great way to get A2 to stop what he is doing is by tapping him on the head to interrupt him.
2. Use the "Reset System" command as often as needed to get
A2 back to Companion mode. This is
a
great way to start any
new commands or if you are not sure what mode R2 is in.
Important:
INER use A2 ouhide. nHER use R2 near stain. Only use R2 on a table when his wheels are locked.
See the other side for a map of
R2's commands.
1
Pkase note.This is just a guide. Please read and refer back to the instruction manual for details on R2's features.