Instructions / Assembly

CONTENTS INSTRUCTIONS

Safety should always be the main priority when using the Sharper Image

Tabletop Fire Pit.

Read all warnings and safety precautions before proceeding.

Place Tabletop Fire Pit on a stable fire resistant surface outdoors.

Fill Burn Chamber with 70% or 91% Isopropyl Alcohol up to the fill line (approx. 1” below the top of

Burn Chamber). This will provide approximately 30 minutes of burn time. For shorter burn times use

less fuel. (See Diagram A)

Light with a Long Handled Lighter or Match – keep body away while lighting. (See Diagram B)

Once the Tabletop Fire Pit is lit – do not move or touch. Follow all safety precautions and warnings.

TABLETOP FIRE PIT

SNUFFING LID

BURN CHAMBER

Getting Started:

Place the included Snuffing Lid over the Tabletop Fire Pit. Do not attempt to blow out

flame. Allow Snuffing Lid to remain on Tabletop Fire Pit for a minute to ensure flame is

completely out. (See Diagram C)

Extinguish Fire:

Ensure flame is completely out. Allow Snuffing Lid to remain on Tabletop Fire Pit for a minute to

ensure flame is completely out.

Refill Burn Chamber. 70% or 91% Isopropyl Alcohol up to the fill line (approx. 1” below the top of Burn

Chamber) with and light according to instructions above.

CAUTION: The Tabletop Fire Pit will be HOT. Do not move or touch while lit or hot. Allow exterior of

Tabletop Fire Pit to cool down at least 30 minutes after fire has been extinguished before touching.

Refilling:

A B

SHARPER IMAGE® NAME AND LOGOS (INCLUDING THE

77 LOGO AND TOMORROW’S TOMORROW) ARE

TRADEMARKS OR REGISTERED TRADEMARKS.

DISTRIBUTED BY ALLSTAR INNOVATIONS HAWTHORNE, NY 10532

PRODUCT COLOR AND APPEARANCE MAY VARY

MADE IN CHINA

IM2

FIRE and EXPLOSION hazard.

Severe BURNS or DEATH can occur.

NEVER add fuel to a hot device.