Instruction Manual

Printed in China. 3

Replacing Propellers

1. Pull firmly to remove broken propeller. Replace

with a new one. Push firmly and carefully.

2. Replace propellers by following the diagram on

the right.

3. Each blade spins differently. Blade A1 turns

clockwise and Blade B1 turns counter clockwise.

Connect the Charge

Cable to the Drone

CHARGING BATTERY

Note: The Battery Charger will light up when it is

charging the battery and turn off when the

battery is fully charged. Charge time is

approximately 120 minutes.

1. Turn off the drone before charging.

2. Connect the Battery Charger Cable to the

port found on the side of the drone.

3. Connect USB connector to the power source.

Insert the

Charge Cable

into a power

source

Fly+Drive Drone — 5-inch