Technical data

3
1. Safe handling
¾ Prior to use, check that the product is in good working order.
¾ Store the charger and Li-ion batteries at room temperature.
¾ Keep dry the charger and Li-ion batteries.
¾ Charge the Li-ion batteries prior to first use.
¾ To prevent damage caused by improper setup or operation, and to not
compromise the manufacturer warranty and liability:
– Use the product only according to these instructions for use.
– Follow the safety and maintenance instructions.
– Only combine Aesculap products with each other.
¾ Keep the instructions for use accessible for the user.
¾ Always adhere to applicable standards.
¾ Ensure that the electrical facilities in the room in which the device is
being used conform to IEC norms.
¾ Unplug the device by pulling the plug, but never by pulling the power
cord.
¾ Do not operate the product in explosion-hazard areas.
¾ Do not use the product if it is damaged or defective. Set aside the
product if it is damaged.
2. Product description
2.1 Package includes
2.2 Components required for operation
• Battery-operated clipping machine Econom CL/Econom CL Equipe
•Charger
• Mains power cord (with device plug)
• Li-ion battery
2.3 Intended use
Battery-operated clipping machine Econom CL/Econom CL Equipe
The battery-operated clipping machine Econom CL/Econom CL Equipe is
used for clipping large animals such as cattle, horses and large dogs.
Charger GT803/Li-ion battery GT801
The GT803 charger is used to charge the GT801 lithium ion battery.
DANGER
Risk of death by electric shock!
¾ Do not open the product.
¾ Connect the product only to a grounded power
supply.
Art. no. Designation
GT800
GT810
Battery-operated clipping machine Econom CL
and Econom CL Equipe
GT801 Li-ion battery
GT803 Charger
see Accessories/Spare
parts
Mains power cord (with device plug)
TA013895 Instructions for use
GT604 Hand oiler