Technical data

10
Econom CL/Econom CL Equipe cattle and horse clipping machine
Aesculap®
8.2 Charger and Li-ion battery
Malfunction Detection Cause Remedy
Charger not working The "Battery" LED indicator is not
lit up
Mains power cord not plugged in Plug mains power cord into the
device socket on the charger and
into the socket of the mains power
supply
Li-ion battery not loaded Mains power cord defective Replace mains power cord
Li-ion battery defect Send Li-ion battery to
manufacturer for repair, see
Technical Service
Li-ion battery cannot be loaded Li-ion battery plugged in, charge
state indicator does not light up
Charger contacts dirty Clean the contacts in the charging
bay, see Reprocessing
– Charger contacts damaged Send charger to manufacturer for
repair, see Technical Service
– Li-ion battery defect Send Li-ion battery to
manufacturer for repair, see
Technical Service
– Charger defect Send charger to manufacturer for
repair, see Technical Service
– Too high a temperature is measured
in the lithium ion battery during the
charging process
Remove the Li-ion battery from the
charging bay, leave to cool and
repeat the charging process
If the problem occurs again: Send
Li-ion battery to manufacturer for
repair, see Technical Service
– Battery charging error or Li-ion
battery defect
Remove the Li-ion battery from the
charging bay and repeat the
charging process
If the problem occurs again: Send
Li-ion battery to manufacturer for
repair, see Technical Service