Use and Care Manual

46 Français
INFORMATIONS
SUR LE
PRODUIT
TABLEAU DE
COMMANDE
GRILLE DE SORTIE
CADRE DU FILTRE
CARTOUCHE DE FILTRE
3-EN-1
PORTE DU COMPARTIMENT
DE FILTRE
LANGUETTE DE LA PORTE DU
COMPARTIMENT DE FILTRE
ENTRÉE D’AIR
CORDON
D’ALIMENTATION
(PAS MONTRÉ)
1
2
3
4
5
6
7
8
2
3
5
6
7
1
LA P
O
RTE D
U
T DE FILTR
E
D ALIMENTATION
(
PAS MONT
RÉ)
4
15
English
GENUINE SHARPER IMAGE FILTERS ARE RECOMMENDED
Peak performance is only realized when genuine Sharper Image Carbon and
HEPA filters are used. Others may claim to be compatible with Sharper Image
units, but the Sharper Image Air Purifier is calibrated to achieve a 99.97% capture
rate of particles 0.3 microns or larger, only when used with Sharper Image Filters.
HOW TO REPLACE YOUR FILTERS
1. Turn off and unplug unit.
2. Turn over the unit and remove the Filter Frame by twisting the Filter Frame
Support Tabs to the open position.
3. Remove and discard used Filters. Simply take hold of the Pre-Filter at any place
along the perimeter and remove. To remove the Filter Cartridge, pull upward
on side tabs until filter is removed.
NOTE: Clean any remaining dust or hair inside the unit by using a vacuum hose. Do
Not use water or liquids to clean the unit.
4. Replace with genuine Sharper Image Filters. Place the Filter Cartridge in the
unit and gently press around the perimeter to ensure placement. Carbon side
of cartridge will go into the unit first so tabs on Hepa are facing up. Place Pre-
Filter on top of Hepa.
NOTE: Take care to remove any plastic bag covering from your replacement filter.
FILTER REPLACEMENT