Service manual

• Character size: 2.4 (H) ✕ 1.36 (W) mm
Print pitch:
Column distance
Row distance
1.59 mm
5.08 mm
• Total number of dots: Receipt – 108 dots/216 positions
Journal – 108 dots/216 positions
Validation – 248 dots/495 positions
• Font: 7 ✕ 7 dots (including half dot)
Space between characters – 1 dot (2
positions)
• Distance between dots: 0.353 mm (H) ✕ 0.353 mm (W)
• Journal near end sensor: Service route option
• Print speed: Approx. 3.0 lines/sec.
• Paper feed speed: Receipt – Approx. 30 lines/sec.
Journal – Approx. 30 lines/sec.
• Reliability: MCBF – 400 million lines (excluding
the print head)
Head life – 10,000 characters
(in the case of printing av-
erage 2 dots per charac-
ter per wire
• Validation form sensor: Not setup
2) Printing area
Receipt/journal
Fig. 5-1
Validation form
Fig. 5-2
3) Paper
• Paper roll dimensions:44.5±0.5mm in width, 83mm in diameter
• Paper quality: Journal
Bond paper (paper thickness: 0.06 to
0.09mm, paper weight: 52.3 to 64g/m
2
)
Validation form
Thickness: 0.07 to 0.14mm
Size: 130mm or more (W) ✕
70mm or more (H)
4) Inking
• Ink supply system: Ink ribbon
• Form: Cartridge/Endless ribbon
• Specification: Material – Nylon
• Ribbon life: Approx. 6 million characters
• Print color: Purple (single color)
5) Logo stamp
• Material: Porous rubber
• Stamp color: Purple (single color)
• Max. stamp size: 30(W) × 20(H) mm
• Ink refill: Allowed (UINK-1001CCZZ: 5CC)
6) Cutter
• Method: Manual
6. Drawer
1) Specification
(1) Drawer box and drawer
Model name of the drawer box SK423
Size 420 (W) ✕ 426 (D) ✕ 114 (H)
Color Light olive gray
Material Metal
Bell —
Release lever Standard equipment;
situated at the bottom
Drawer open sensor Standard equipment
Separation from the main unit Allowed with service kit
2) Money case
Separation from the drawer Allowed
Separation of the bill compartments from the coin
compartments
Disallowed
Bill separator —
Number of compartments 4B/8C
3) Lock
• Location of the lock: Front
• Method of locking
and unlocking:
To lock, insert the drawer lock key into the
lock and turn it 90 degrees counterclockwise.
To unlock, insert the drawer lock key and turn
it 90 degrees clockwise.
• Key no.: SK1-1
87.08
44.5± 0.5
RECEIPT JOURNAL
Unit : mm
37.87
44.5± 0.5
3.56 3.56 3.56
37.87
4.2
3.56
70
130 ~ 210
87.08 (PRINT AREA)
20
22
Unit : mm
4B/8C
– 5 –