Installation guide

KINO-6612 Mini-ITX Motherboard
Page 142

Disabled
PS/2 mouse support is disabled and prevented from
using system resources.

Enabled DEFAULT
Allows the system to use a PS/2 mouse.

Auto
The system auto-adjusts PS/2 mouse support.
 Wait For ‘F1’ If Error [Enabled]
Use the Wait For ‘F1’ if Error option to specify how the system responds when the
system detects an error on boot up.

Disabled
If there is an error when booting up, the system does not
wait for user intervention but continues to boot up in the
operating system. Only use this setting if there is a
known reason for a BIOS error to appear. An example
would be a system administrator must remote boot the
system. The computer system does not have a keyboard
currently attached.

Enabled DEFAULT
If there is an error during boot up, the system waits for a
user to press “F1” and enter the BIOS to rectify the
problem. The BIOS can then be adjusted to the correct
settings.
 Hit ‘DEL’ Message Display [Enabled]
Use the Hit “DEL” Message Display option to specify whether the instruction to hit the
delete button to enter BIOS during POST appears or not.

Disabled
No message displayed during POST

Enabled DEFAULT Displays “Press DEL to run Setup” message in
POST