XR-20X/S/XR-10X/S Operation-Manual GB
Table Of Contents
- Introduction
- Quick Start
- Setup
- Connections
- Basic Operation
- Useful Features
- Operating with the Remote Control
- Menu Items
- Using the Menu Screen
- Picture Adjustment (“Picture" menu)
- Adjusting the Projected Image (“SCR - ADJ” menu)
- Adjusting the Projector Function (“PRJ - ADJ” menu)
- Auto Search Function
- Auto Sync (Auto Sync Adjustment)
- Auto Power Off Function
- Setting the Confirmation Sound (System Sound)
- Speaker Setting
- Selecting the Transmission Speed (RS-232C)
- Fan Mode Setting
- Checking the Lamp Life Status
- System Lock Function
- Locking the Operation Buttons on the Projector (Keylock Function)
- Troubleshooting with “Help” menu
- Appendix
22
Samples of Cables for Connection
Cables for a camera
or a video game
Equipment
Input
Signal
Cable
Terminal on the
projector
ø3.5 mm stereo audio cable
(commercially available or available as Sharp
service part QCNWGA038WJPZ)
RGB cable (supplied)
S-video cable (commercially available)
Video cable (commercially available)
Computer
Audio-visual
equipment
Camera/
video game
RGB
video
Computer
audio
S-video
S-video
Compo-
nent
video
Video
Audio
Cables for a camera or a video game/3 RCA
(Component) to 15-pin D-sub cable (optional,
AN-C3CP2)
ø3.5 mm minijack to RCA audio cable
(commercially available)
INPUT1, 2
AUDIO INPUT
INPUT3
INPUT4
AUDIO INPUT
INPUT1, 2
INPUT3
Video
Audio
Cables for a camera
or a video game
Cables for a camera or a video game/ø3.5
mm minijack to RCA audio cable (commer-
cially available)
INPUT4
AUDIO INPUT
3 RCA (Component) to 15-pin D-sub cable
(optional, AN-C3CP2)
Compo-
nent
video
INPUT1, 2
•
For more details of connection and cables, refer to the operation manual of the connecting equipment.
• You may need other cables or connectors not listed below.
RCA adaptor plug
(commercially available)
RCA adaptor plug
(commercially available)
or
or connect directly to
AUDIO (INPUT 3, 4).
or
or