User Manual

19
Setup
Projecting a Reversed Image
Projection from behind the Screen
■ Place a translucent screen between the projector and the audience.
■ Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page
46.)
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
■ When the translucent screen is placed between the mirror and audience, set to “Front” in the
“PRJ Mode” menu. (See page
46.)
■ When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See
page 46.)
Mirror
Translucent screen
Audience
Set to “Front”
Translucent
screen
Mirror
Audience
Set to “Rear”
Audience
Info
• When using a mirror, be sure to carefully position both the projector and the mirror so the light does
not shine into the eyes of the audience.