Specifications

E-19
ENGLISH
XL-UR27H
2008/June/10 XL-UR27H2008/June/10 XL-UR27H
USB Memory Playback
Listening to USB memory device/MP3
player (continued)
Note:
To pause playback:
Press the / (USB / ) button.
To remove USB memory device
Notes:
 SHARP will not be held liable for the loss of data whilst the USB memory
device is connected to the audio system.
 Files compressed in MP3 and/or WMA format can be played back when
connected to the USB terminal.
 This USB memory’s format supports FAT 16 or FAT 32.
 SHARP cannot guarantee that all USB memory devices will work on this
audio system.
 USB cable is not recommended for use in this audio system to connect
to USB memory device. Use of the USB cable will affect the
performance of this audio system.
 This USB memory cannot be operated via USB hub.
 The USB terminal in this unit is not intended for a PC connection but is
used for music streaming with a USB memory device.
 External HDD-storage cannot be played back via USB terminal.
 If the data inside the USB memory is large, it may take longer time for the
data to be read.
 This product can play WMA and MP3 files. It will automatically detect the
file type being played. If unplayable file is played on this product, “NO
SPPRT” is indicated and the file will be automatically skipped. This will
take a few seconds. If abnormal indications appear on the display due to
the unspecified file, turn off the unit and then turn it on again.
 This product relates to USB memory devices and MP3 players. It may
however face some irregularities due to various unforeseen reasons from
some devices. Should this happen, turn off the unit and then turn it on
again.
 The USB terminal is intended for direct connection to a USB memory
device without any cable.
2 Press the FOLDER button, and press the TUNING ( or ) button
to select desired playback folder.
 To start playback with folder mode on, go to step 4.
 To change the playback folder, press the TUNING ( or ) button to
select another folder
.
3 Select desired file to be played back by pressing the or
button.
4 Press the / (USB / ) button.
Playback will start and the file number selected will be displayed.
 Title, Artist & Album name are displayed if they are recorded in the USB
memory device.
 Display content can be changed by pressing the DISPLAY button .
( ) Only appears when clock is already set.
FOLDER Indicator
FOLDER number
Total files in Folder 2
( )
File Name Display
Clock Display
File Number Display
Title Display
Artist Display
Album Display
TITLE-1 Indicator
TITLE-2 Indicator
TITLE-3 Indicator
1 Press the (USB ) button to stop playback. Then press the
(USB ) button again and wait until “OK” is displayed.
Always remove the USB memory device after “OK” appears on the
display. Improper removal of the USB memory device may cause
irregularities such as continuous appearance of “READING FILES”.
Should this happen, turn off the unit and then turn it on again.
2 Disconnect USB memory device from the USB terminal.